Stamping RFQ & Quotation Engineering

This is where your quotation is decided.

You are inside a running progressive die. Tap a station or Next: one press stroke each. The numbers shown are an example; in your project they come from SIS, GODI's internal Stamping Intelligence System.

SIS · force vs crank angle
1,180 kN0°180° BDC360°25 strokes/min · Generic press 1,600 kN · 74 % used
SIS · force per station (kN)
Max. thinning 17.8 % · limit 20 % · OK
  1. Station 01 PILOT: First we fix the references. We review the part, the material and your assumptions, and flag what is missing before anything is calculated.
  2. Station 02 PIERCE: We find the weak spots. Forming feasibility: thinning, cracks and critical features, checked on the real geometry.
  3. Station 03 TRIM: We cut away the wrong concepts. Progressive, transfer and combined routes, nesting and 1-, 2- and 3-out options compared on the same assumptions.
  4. Station 04 FORM: The concept takes shape. Strip layout, station sequence, pitch and strip width, with the force at every station.
  5. Station 05 FLANGE: Your part is formed in our solvers. Every form of your real 3D part runs through GODI's forming solvers before we quote.
  6. Station 06 RESTRIKE: We calibrate it to your presses. Springback and restrike, then force, energy, die space and speed on the presses you actually have.
  7. Station 07 CUT-OFF: The cost is cut free. Tooling investment and piece cost, with every figure tied to a stated input.

We turn your stamping RFQ into a checked quotation basis.

Send an RFQ

Problems we solve

The questions behind every stamping RFQ

01Too much RFQ engineering time

Concept and costing work done for your team.

02Can this part be formed?

Early review of forming risks and critical features.

03What is the right production concept?

Progressive, transfer and combined routes, nesting configurations and 1-, 2- and 3-out options compared.

04Will it run on our presses?

Force, energy, die space and speed checked on your equipment.

05Which concept makes economic sense?

Tooling, press hours and piece cost side by side.

06Can we trust the quoted cost?

Every figure traced to stated inputs and assumptions.

How GODI helps

One engineering flow, from RFQ to quotation basis

  1. 1Receive RFQ package
  2. 2Review part and assumptions
  3. 3Develop and check manufacturing concepts
  4. 4Check forming, feasibility, press fit and economics
  5. 5Deliver engineer-supported quotation basis

What we check

Checked before you quote

For every concept we check forming feasibility and thinning, the forming sequence, the strip layout and the springback, so the quotation rests on results, not assumptions. All checks run on GODI's own software, developed in-house and owned by GODI, and every result is reviewed by an engineer.

See what we check

What you receive

A quotation basis you can defend

Engineer-reviewed, not spreadsheet guesswork

Feasibility & risk review

Critical features and forming risks, rated.

Production concept

Route, stations, strip width and pitch.

Equipment-fit check

Which presses fit—and why others do not.

Tooling and piece-cost basis

Concepts compared on tooling, material and press time.

Stamping Intelligence System

SIS — the system behind the speed

SIS is GODI's proprietary Stamping Intelligence System. It connects manufacturing concepts, press feasibility, tooling estimates and piece costing in one engineering workflow. We use it to compare alternatives and prepare an engineer-reviewed basis for your quotation. Including GODI's own forming, springback, nesting, strip-stability and layout solvers, with exact forces per station.

Compare concepts · Routes · nesting · 1- / 2- / 3-out

Check equipment · Force · energy · shut height

Connect costs · Tooling and piece cost

Document decisions · Assumptions · evidence

Developed and continually refined by GODI.

Explore SIS

Why customers use GODI

Faster offers. Firmer numbers.

Shorter quotation cycle

Engineering off your critical path.

Faster revision handling

New volume or press? Recalculated, not rebuilt.

Better engineering basis

Concepts checked against real equipment.

More confidence before commitment

Know the tradeoffs before you price.

25+ years of automotive stamping engineering — progressive, transfer, tandem and prototype tooling. Several hundred RFQ cases evaluated for European stamping suppliers.

Need support on your next RFQ?

Send your package and we will evaluate it.